2024-2026 Toyota Tacoma Preload Collar Lift Kit
Westcott Designs preload collar lift kit for the all-new 2024-2026 Toyota Tacoma! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and after installation the vehicle should be aligned to the following specifications:
-
Camber: 0.2 - 0.4 positive
-
Caster Split: 0.4 with higher on the right
-
Toe: 0.1 toe out on each side (total 0.2 toe out)
It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel.
These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA!
* Patent Pending
* No shocks are included with any preload collar lift kits
Note: Product photos are of prototype unit, finished product will be hard anodized black as advertised.
This kit provides the following lift 2.5″ in the front & .75″ in the rear for the following Trims:
- SR
- SR5
- TRD Off-Road
- TRD Sport
-
TRD PRO: For the Tacoma TRD Pro with Fox PRO Suspension equipped trucks - expect 1.75″ (front lift) and .75″ (rear lift)
-
Limited: with AVS Suspension - expect 1.5” (front lift) and .75” (rear lift)
- Trailhunter (FRONT-ONLY) - Adds 1.5″ of lift in the front only
About the 2024-2026 Toyota Tacoma Trailhunter Westcott Designs FRONT-ONLY lift kit:
Westcott Designs(TM) preload collar lift kit for the all-new 2024+ (4th Gen) Toyota Tacoma Trailhunter. This is a FRONT-ONLY Lift Kit. With the factory suspension, we used the front-only collars to provide the extra front-end lift to level-out the look and didn’t think the rear needed more lift. This front-only kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. From the factory the new Trailhunter comes with 2″ of front lift and 1.5″ in the back on 33″ Goodyear tires. Our Westcott kit gives your Trailhunter an additional 1.5” of lift in the front using your factory shocks and springs. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new Upper-Control Arms, and you can run up to a true 35″ Tire (tested with a 35 x 12.5 x 18” tire with the factory Trailhunter wheels).
Lift Kit Options:
- FULL Preload Collar Lift Kit - providing lift for the front and rear of the truck
- FRONT-ONLY lift kit - giving you the ability to use the front only preload collars to bring the front-end higher - adds 2.5″ in the FRONT ONLY.
- REAR-ONLY lift kit - gives you the ability to add some more lift in the rear of the vehicle - adds .75″ for the REAR ONLY.
*IMPORTANT - TRD Off-Road is Slightly Different - see video below:
*Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe*
*IMPORTANT: All Tacoma Lift Kits and Suspension Components Tested on 4×4 Models. We Do Not Guarantee Fitment for 4×2 Models.
