B.O.T.C.K - Bolt On TrackBar Correction kit Gen3 Sequoia

Fits:

Gen 3 Toyota Sequoia (may fit LC300 — confirmation soon)

What It Does

• Fixes that sketchy, side-to-side axle swing after a lift.

• Brings your track bar (panhard bar) back to a more natural, level position.

• Keeps your rig tracking straight, planted, and predictable on-road and off.
  Bolt-on design — no welding, no guesswork.

• All brackets have the potential to contact frame under suspension cycle  this can be addressed with longer bump stops or bump stop drop .  Or get the shorty !

Why It Matters

• When you lift your rig, the track bar angle gets steep. That forces the axle to swing left/right instead of moving up/down — making the rear feel unstable.
• The B.O.T.C.K. raises the pivot point to flatten that bar and bring your handling back to normal. Simple fix, huge difference.

Shorty vs. Regular – Pick the Right One 

How to Pick the Correct B.O.T.C.K. Version

1. Park on level ground.

2. Measure from the ground to the center of the frame-side track-bar bolt.

3. Measure from the ground to the center of the axle-side track-bar bolt.

4. Subtract the two measurements to find your bolt-height difference:

• 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)

• 3" or higher → Standard Version (use the top hole)

Planning to lift higher later? Go with the Standard Version — it gives you extra mounting options as your suspension height changes.

Updates You Need to Know

• No more flange nuts – now standard hex nuts.

• Washer for side bolt no longer needed.

• Torque spec: 105 ft-lbs on all bolts with lots of blue Loctite (or a little red).

• KDSS or non-KDSS? Doesn’t matter. Works with both.
  

Real Talk

• Stop buying parts you don’t need — understand what it does before hitting checkout.

• This kit isn’t just stronger than weld-on options — it spreads load evenly across the OEM mount instead of depending on the welds.

• Designed for rigs that actually see dirt, not just mall crawlers.
  

What’s Included 

• Front bracket

• Back bracket

• Flag nut

• (1x) M14 x 1.5 x 75mm flange head bolt

• (1x) M14 x 1.5 x 80mm flange head bolt

• (2x) M14 x 1.5 x 35mm flange head bolt

• (1x) M14 hex nut

• All hardware is zinc coated

Fulfillment Time: Please allow 36–48 hours.

UPDATED:  (Torque bolts to 105 ft-lb)

We want you to be completely satisfied with your purchase. Please read our return and exchange policy carefully before initiating a request.

Eligibility for Returns

• Items must be unused, uninstalled, and in brand-new condition with no signs of attempted installation.
• The product must be properly packaged to prevent damage during transit.
• Customers must contact us before initiating a return to receive approval and instructions.

Restocking Fee & Return Shipping

• A 20% restocking fee applies to all returns, no exceptions.
• We will cover the cost of the return shipping label, but the item must be packaged securely to avoid damage.

Exchanges

• We do offer exchanges, but the customer is responsible for covering shipping costs both ways (returning the original item and shipping the new item).
• The product must be in brand-new, unused condition to qualify for an exchange.

Damaged Returns

• If the returned item arrives damaged or improperly packaged, we will send it back to you, and the return will not be processed.

By purchasing from us, you agree to these return and exchange terms. If you have any questions, please contact us before initiating a return or exchange.